Pumps and Compressors
EPT provides industrial machinery equipment. Our machinery team established the practice as a leader in sales and service of compressors and pumps, including other related machinery equipment.
EPT enjoys a reputation for service and repair, providing prompt service in the field or in our well-equipped service center. Services provided include:
- Procurement And Packaging
- Contract Maintenance and Repairs
- Installation,
- Engineering and Parts
- Solids Reduction
- Rental
EPT has a large inventory of parts and provides service for many other equipment brands as well.We support; air compressors, air dryers, air compressor system components, air compressor parts, air compressor rentals, air compressor repair, air system audits, air system installations, control systems, cooling towers, fluid pumps, vacuum pumps, other
Valve
Your partner for industrial valves !!!
We supply industrial valves for plant and pipeline applications and are used for shutting off, controlling, regulating, and securing. We can support almost all branches of industry, for example in water, oil, and gas supply, as well as in the chemical and petrochemical industries. But also in the pharmacy and energy industry. Our fields of application range from gases to drinking water to industrial valves for highly powerful chemicals.
EPT supplies the complete range of cast and forged steel and stainless steel valves with all necessary approvals such as ISO 9001, API-6A, API-6D, API607, CE PED, ATEX, HP0 and TRB, TRD, etc. for all major industrial applications in power plants, oil and gas pipelines, petrochemical and chemical plants.
As a supplier, we deliver ball valves, gate valves, globe valves and check valves with EC type examination and also with modifications according to regulatory requirements including certification, which helps to achieve outstanding performances.
At our company, we have experience in the project area and through a good consultation, we want to provide an optimum of time and costs efficiency for our customers.
Our warehouse has large quantities of cast-steel gate valves with pressure ratings from PN16 to PN40 and nominal sizes from DN 50 to DN 600, cast-steel globe valves from PN 16 to PN40 and DN 15 to DN 200, as well as cast-steel check valves from PN 16 to PN 40 and DN 50 to DN 400.
Other materials, sizes and executions are available according to individual requirements.
Through modifications in our own workshop, automation of valves, repair and reconditioning, we are able to meet your requirements effectively and quickly !!!
Remanufacturing Activities
Some of the maintenance activities were carried out infield, while a sizable proportion had to be transported to EPT’s workshop. An A-frame was utilized for the large sized valves such as; 10” x 300#, 20” x 300# etc. During the course of executing projects, the major damages experienced and the corrective action taken are as indicated below;
EPT VALVE MAINTENANCE ACTIVITIES AT AN EX-SHELL ASSET IN THE NIGER DELTA REGION
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
1. Wounded/damaged Teflon
1. Replace damaged Teflon
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
2. Wounded ball
2. Treat the ball
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
- Wounded/damaged O rings on seat and/ shaft
- Replace wounded/damaged O ring on seat and/shaft
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
4. Stiff/Damaged gear
- Service/ grease / Replace damaged gear
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
5. Shaft Leakage
5. Replace internal seals
BALL VALVE REMANUFACTURING
OBSERVED DAMAGE
RECTIFICATION ACTION
- Damaged/Wounded plug ring
- Pitted plug
- Replace wounded damaged O ring
- Fill lap and machine the plug.
LCV PLUG VALVE
OBSERVED DAMAGE
RECTIFICATION ACTION
- Deeply pitted piston
- Deeply pitted seat
- Fill, lap and machine the piston/fabrication of new piston
- Fill, lap and machine the seat/ fabrication of the new seat.
LCV PLUG VALVE
OBSERVED DAMAGE
RECTIFICATION ACTION
- Damaged/wounded diaphragm
- Bent/wounded actuator shaft
- Service/replace wounded diaphragm
- Repair/replace actuator shaft
MSDV ACTUATORS/BETTIS
OBSERVED DAMAGE
RECTIFICATION ACTION
- Leakage
- Pitted Drum and Slow/No response, Stuck.
- Change internal seals (Plunger chamber seals, Air drum seals, Spring chamber seals).
- Resurface/Treat the pitted drum, replace the Diaphragm, Service the plunger chamber,
GLOBE VALVE
OBSERVED DAMAGE
Passing in fully closed position/stiff
- Wounded disc
- Wounded seat
RECTIFICATION ACTION
- Fill, lap and machine the wounded disc
- Fill, lap and machine the wounded seat
GATE VALVE
OBSERVED DAMAGE
Passing in fully closed position/stiff
- Wear and corrosion of disc
- Packing gland leakage
RECTIFICATION ACTION
- Filling, lapping and machining of the disc.
- Replace packing gland and overall maintenance of the valve internals
Liquid gas separation
Mist Eliminator
The conventional knitted mesh pads correctly designated give the good result in horizontal & vertical mist eliminator applications. But, the high gas velocity prevents the drainage of the liquid captured correctly. A thin liquid layer forms at the bottom part of pads at moderate gas velocity and liquid loads.
If the velocity or liquid loads increases again, the liquid zone becomes thicker, thereby causing total flooding of the pads. The liquid will be re-entrained and large droplets returned to the pads.
To solve the above problem, HMDS supply H-Opti-MESH®, this unique design is to create throughout reinforcements preferential capture zone liquid, this area sucks surrounding liquid drainage areas and surface tension allows fluid stream below this area thus allowing the gas to flow easily and increasing the ability of pads and reducing the pressure drop (Pressure drop)
H-Opti-Mesh can handle 20 to 30% more flow than conventional mesh pads in the same service, Lower pressure drop compared to conventional mesh pads and High efficiency for capturing fine droplets.
Candle Mist Eliminator
Our mist eliminators candles are specially designed to be used in many processes generating mists. Its simple and economical design combines to its special texture in fiber allows it to be a flagship product and very effective in removing submicron liquid particles of gas and air streams. The fine particles of 0.1 to 3 microns are captured at 99% thanks to a texture fibers or fiber/metal mesh layer mounted between two concentric cages securely assembled. Fiber is precisely wound to ensure optimum efficiency and pressure drop. Our candles are cylindrical but geometrically can be adapted to customer needs.
Vane Mist Eliminators
This type of impingement mist extractor consists of a series of vane or plate between which the gas must flow. The vanes force the gas flow to be laminar between parallel plates that contain directional changes. The surface of the plates serves as a target for droplet impingement and collection.
Chevron Mist Eliminators
Chevron packs are vane-type separators of high velocity droplets. When they are properly designed, they can be very effective to collect droplets <10 microns in diameter. In general, they are used for the collection of droplets greater than 20 microns. Chevron is a solution as in the case of contains solid fluid with a special design that allows gas to pass vertically or horizontally between the blades. The variation of spaces between the blades allows high volume production capacity with low pressure drop. We offer different types of Chevron that will be specifically designed according to customer needs.
Vane Inlet Distributor (VID)
VID devices are used in the phase separator in various applications principally for uniform distribution of the inlet flow through cross sections of the equipment. A uniform distribution of fluid across the cross-sectional geometries becomes important to minimize the drainage of fluid, which can result in reduced efficiency of the equipment.
Instrumentation and Controls
Our Instrumentation and Controls Team’s Strengths…
Our instrument and controls team has a broad background in industrial process automation from machine control. Our common sense approach and field experience when combined with our process and piping expertise allow us to solve your process instrumentation and controls problems and make your project a success.
EPT offers a full range of Instrumentation and Control Systems services including system analysis, hardware and software engineering design, control panel assembly, installation, testing and commissioning.
We at EPT are specialists in specifying, procuring, calibrating, installing, piping, loop checking, commissioning and maintaining instrumentation and control systems for a wide range of industrial and commercial process control applications, ensuring that your plant operates safely.
Our Instrumentation & Control Services Covers:
- Calibration
- Instrumentation & Automation Control
- Control Panel Layouts
- Process Computers/DCM System Selection
- Programmable Automation Logic Controller
(PAC) Design & Programming
- PAC Configuration
- Loop Diagrams & Analysis
- FAT (Factory Acceptance Tests)
- Logic Diagrams
- PLC to DCS Communication Design
- Field Calibration & Loop Checks
- System Requirements Specifications (SRS)
- DCS Configurations/Communications Architecture
- Distributed Control Systems (DCS)
- Instrument Specifications
- Instrument Writing Diagram Design
